The Breg Polar Care device is designed for the management of pain and inflammation and serves as a cold therapy instrument. Similar to any medical equipment, its functionality and durability are in direct relation to its maintenance.
This is not just a piece of equipment that you invest in and then forget about; it becomes part of your healing journey. Some of the maintenance tips for this device are outlined below.
Understanding Your Breg Polar Care Wave
The Polar Care Wave consists of several key components. It includes the cooler, the pump, the power supply and the pad system. All of them are important in the anatomy of this device. The cooler stores the ice and water solution used to facilitate the creation of cold therapy while the pump circulates cold water around the system. The pad is placed directly on your body and that is where the cold therapy occurs. The pad is where the cold therapy comes directly in contact with the body.
An understanding of what each part does assists in the proper maintenance of each. For example, there is always a need to submerge the pump in the water-ice slush so that it doesn’t run out of its supply and suffer damage.
Routine Maintenance Tips for Your Breg Polar Care Wave
a. Regular Cleaning
Once the cooler has served its purpose, you should ensure to empty it and wipe the surface with a clean cloth to avoid accumulation of any substance in/on the cooler. Wash the pad under cool water and make sure the liquid evaporates (or is wiped off) before tossing it in a storage shelf. This helps in avoiding formation of mold and mildew.
b. Check Connections
A few times per year, inspect for leaks in the connections or signs of wear. Check your fittings and the cables too and see that all loose parts are screwed tightly and that all components that are worn out are replaced. This not only enhances efficiency but also the safety of the device during operation.
c. Inspect Electrical Components
The power supply and the cables that are used should be inspected for signs of damage. Should the cord appear worn or frayed, or the plug is damaged in any way, it is important that it be replaced.
Troubleshooting Common Issues
Sometimes, no matter how much we try, we cannot protect a piece of equipment from failing. If your Breg Polar Care Wave is cooling insufficiently, it is advisable that you check whether the cooler has sufficient ice and water. If the pump creates some undesirable sounds, it might be due to low water levels or an accumulation of dirt and other particles. You can consult with a mechanic to conduct routine checks, which will enable you to identify these problems in their early stages.
Conclusion
Caring for your Breg Polar Care Wave is not a very time-consuming task, but you need to be as regular as possible. The best way to make sure that it operates optimally is through maintenance checks or regular cleaning. Certainly, if you take good care of your device, it will in turn take good care of you and enable you to recover quickly and efficiently from injuries.
